Aluminum strip with round edge and without burr

Aluminum strip with round edge and without burr

The aluminum strip with round edge and without burr has good edge quality and can avoid the problem of broken edges in the process of use. The slitting machine is the equipment used to cut off the edge of the aluminum strips. It is necessary to ensure that the edge of aluminum strip is clean and free from burrs, and also make sure that the width after slitting is within the specified standard range.

The alloy grades of aluminium strips for sale are 1050, 1060, 1070, 1100, 3003, 3004 and 5052 aluminum. The tempers are O, H12, H14, H18, H19, H22, H24, H26. The specific uses of aluminum strips include transformer winding aluminum strips, high-frequency welding hollow aluminum strips, fin radiators aluminium strips, cables aluminum strips, stamping aluminum strips and edge aluminum strips. The surface of high quality aluminum strips is smooth, clean, and corrosion, cracks through the ventilation hole defects, scratches, oil stains, patterns are not allowed. The slitting edges of aluminium strips should be neat, no cracks and burrs.
Compared to similar products, Haomei supply aluminum strip with round edge and without burr have small thickness tolerances and high width accuracy. Strictly inspect the surface quality and the burrs on the edges of the aluminum strips to ensure product quality better.