Currently，the largest circulation of aluminum plate on the market is 1050 and 1060 series.1050 aluminum and 1060 aluminum plate are 1XXX series pure aluminum. Because it does not contain other technical elements, the production process is relatively simple. Both of which belong to industrial pure aluminum but not the same, each has a special purpose. Haomei Aluminum is 1050 aluminum manufacturers, the production of 1060 aluminumstandard parameters to meet national standards, has its own characteristics and the use of channels.
1050 aluminum alloy is made by adding a small amount of copper into pure aluminum. It has excellent molding characteristics, high corrosion resistance, good weldability and conductivity, often used in products with low strength requirements, such as welding parts, sheet metal processing parts, chemical equipment, nameplate, kitchen utensils, Heat exchangers, decorations, reflective appliances, clock surfaces and discs. 1050 aluminum alloy mechanical properties: tensile strength σb (MPa) 95 ~ 125 conditions yield strength σ0.2 (MPa) ≥ 75.
1060 aluminum plate’s aluminum content is 99.6%, which is also a pure aluminum plate. It has a good elongation and tensile strength, fully able to meet the conventional processing needs, (stamping, stretching) high formability, anodic oxidation. 1060 cold-rolled aluminum plate is widely used in lamps, signs, curtain wall, insulation and other fields, and 1060 hot-rolled material thickness of 0.1mm aluminum plate is used for auto parts. In summary, 1050 aluminum and 1060 aluminum plate in the use of a lot of similarities, but in the treatment process and material composition has a greater difference.
1060 aluminum plate’s aluminum content is 99.6%, which is also a pure aluminum plate. It has a good elongation and tensile strength, fully able to meet the conventional processing needs, (stamping, stretching) high formability, anodic oxidation. 1060 cold-rolled aluminum plate is widely used in lamps, signs, curtain wall, insulation and other fields, and 1060 hot-rolled material thickness of 0.1mm aluminum plate is used for auto parts. In summary, 1050 aluminum and 1060 aluminum plate in the use of a lot of similarities, but in the treatment process and material composition has a greater difference.
Haomei Aluminum 1060 aluminum plate’s standard parameters is in line with the international standard parameters, is a professional aluminum manufacturer. Haomei in China has a good reputation, receiving the majority of customers’ praise. 1050 aluminum plate and 1060 aluminum plate are pure aluminum plate , and both have a wide range of use, leaving the customer a good impression.
No comments:
Post a Comment